Hey everyone, let’s cut to the chase — if you’ve ever walked down the hardware aisle, you’ve seen rows of fasteners and probably grouped them all as “screws,” right? I get it, I used to too, until I started this gig as a supplier of… well, other fasteners. Over the years, I’ve gotten so many questions: “If I need a screw, why would I need your stuff?” or “A bolt’s just a big screw, duh.” Spoiler: it’s not that simple. Let’s break down how our fasteners differ from the ones everyone always talks about — no boring jargon, I promise. Other Fasteners

First, let’s get the basics straight: what even is a screw, for context? Most people know screws as those pointy, threaded metal pieces that you twist into wood or drywall, right? They have a defined head (Phillips, flat, hex, whatever) and external threads that pair up with a pre-drilled hole — sometimes a pilot hole, sometimes just enough to bite into material on their own. The big thing here is screws do two jobs at once most of the time: they clamp two pieces together and create that thread engagement with the host material, like turning a wooden stud’s own fibers into part of the hold. That’s why you use a screw to hang a shelf — it’s grabbing the wood itself to stay put, not just pulling two separate parts tight.
Now, the “other fasteners” I supply? They’re built for jobs where screws just can’t cut it. Let’s start with the most common one I get asked about: bolts. A lot of folks mix bolts and screws up, but here’s the line: bolts don’t make their own threads. If you’re using a bolt, you need a pre-tapped hole (one already threaded with matching grooves) in one piece, or a nut to twist onto the bolt’s threads from the other side. Think about engine components — the bolts that hold your car’s crankshaft cover on, for example. You can’t just twist a screw into a block of aluminum; you’d strip the threads in no time. Bolts are for heavy, reversible clamping, and that’s exactly what they’re designed for. I had a client last month building commercial HVAC units — they’d been using screws that kept snapping under the vibration, switched to hex bolts and lock nuts, and cut their part failure rate by 90%. That’s the kind of difference we’re talking about.
Next up: rivets. These are total workhorses for permanent connections, and they’re nothing like a screw. A rivet is a smooth, unthreaded shank with a head on one end. You put it through two aligned holes, then flatten the other end (called “bucking” it) with a tool to create a second head. That’s it — no twisting, no threading, just compression holding everything together. Why would you use a rivet instead of a screw? For one, it’s way faster for mass production. When airplanes are built, rivets are everywhere — you can’t use a screw there because over time, vibration would loosen it. Rivets stay tight forever. I supply a lot of blind rivets, too, which are perfect if you only have access to one side of a part — like attaching a handle to a plastic cabinet from the front, no need to thread a nut on the back. Screws can do that, but rivets create a more uniform, vibration-resistant hold. I once had a small aircraft repair shop call me at 2 PM because their supplier bailed on them — they needed 500 blind rivets for a weekend repair, and we had them on the truck by closing time. That’s the side of the business you don’t get from a standard screw supplier.
Then there’s nuts and washers — wait, yeah, those count too. Nuts are basically just internal threads that pair with bolts; washers are flat (or spring-shaped) discs that spread the load between a fastener’s head and the material. Screws rarely use traditional washers because their head’s shape already distributes pressure, right? But if you’re using a bolt, a plain washer keeps the nut from digging into soft material, and a lock washer (like a split ring) stops the whole thing from backing loose. Some of the projects I work on are for outdoor decks — not the screws for hanging railings, but the heavy-duty carriage bolts that hold the deck joists. We supply the matching washers and nuts that go with them, and I always tell clients: “Don’t skip the washer here, even if it feels like extra work — your deck will last 10 years longer.” Screws don’t need that, but our stuff does, because bolted connections rely on that even pressure to stay safe.
Wait, what about staples? A lot of people think staples are just for upholstery, but they’re another non-screw fastener. Staples are u-shaped pieces with sharp points, and they work by piercing material and bending the legs on the other side to hold. Unlike a screw, which twists its way in, a staple just pierces and anchors. That’s perfect for things like attaching insulation to walls or laying carpet padding — super quick, no need for a drill. But if you tried to use a staple for a structural job, like holding a roof truss together, it would pull right out. Screws are stronger for that, which is why they’re used for framing, but staples are exactly the right fastener for non-structural, mass-applied jobs, and that’s where we come in.
I also want to talk about something not everyone knows: threaded inserts. These are for when you have a soft material — like plywood, plastic, or MDF — that would strip out if you just drive a screw into it. A threaded insert is a small metal piece with internal threads, you press it into a hole in the soft material, and then you can use regular screws in that. Wait, but why isn’t that just a screw? Because the insert creates a solid, threaded base that won’t strip. I had a furniture maker client who was going through 1,000 screws a month because they kept pulling out of their particleboard table tops. Switched to threaded inserts and our machine screws that pair with them, and now they go through 100 inserts a month instead — way cheaper long-term. That’s a perfect example of how our fasteners solve a problem screws can’t, no contest.
Let’s address a common mix-up people have: self-tapping screws. Yeah, these do make their own threads, so sometimes people group them with other fasteners, but they’re still screws at their core. A self-tapping screw has a tapered thread that cuts into a pre-drilled hole (usually metal or plastic) instead of a tapped one. But even then, they’re designed for that single “bite into material” job, not the clamping role bolts or rivets do. I don’t supply self-tapping screws because that’s not our niche — we focus on the fasteners that fill gaps screws just aren’t built for.
Now, why does this matter for your project? Let’s think of a real example: if you’re building a bookshelf out of solid wood, screws work great. But if you’re building a metal storage rack that holds 500 pounds, screws will loosen from the vibration and fall out. You need bolts and lock washers. If you’re assembling a kids’ toy that needs to be durable but not too heavy, threaded inserts so the plastic parts don’t strip. If you’re putting together a trailer, rivets so the frame doesn’t come apart on a bumpy road. These aren’t small differences — using the wrong fastener can lead to failures, wasted time, or even safety issues.
I get it, if you’re just a weekend warrior hanging pictures, screws are fine. But if you’re a contractor, a manufacturer, a repair shop, or even a hobbyist working on a bigger project, “other fasteners” aren’t a second choice — they’re the right choice. That’s why I started this business: I saw too many guys buying the wrong stuff from big box stores, then having to redo a job because a screw didn’t hold. We stock all the stuff you won’t find in the small hardware aisle: industrial-grade rivets, heavy-duty bolts, threaded inserts, specialty washers, and more.

If you’re tired of screwing around (pun absolutely intended) with fasteners that don’t work for your project, let’s talk. We can help you figure out exactly what you need, no sales pitch, no jargon — just straight talk about what will hold up. Whether you need a small order for a one-off repair or a bulk order for a big manufacturing run, we’ve got you covered. Reach out, and let’s make sure your next project is the one that doesn’t have to be redone because of a bad fastener.
Hex Coupling Nuts References:
- Shigley, J. E., Mischke, C. R., & Budynas, R. G. (2004). Mechanical Engineering Design (7th ed.). McGraw-Hill.
- American Society of Mechanical Engineers (ASME). (2020). B18.100: Fastener Standards General Requirements.
- Kalpakjian, S., & Schmid, S. R. (2019). Manufacturing Processes for Engineering Materials (7th ed.). Pearson.
- Aviation Maintenance Technician Handbook: General. (2021). Federal Aviation Administration (FAA).
- Furniture Industry Materials and Fastener Guidelines. (2022). American Home Furnishings Alliance (AHFA).
Shanghai Welfast Enterprise Co., Ltd.
As one of the most experienced fasteners manufacturers and suppliers in China, our products have good reputation in the market. Please rest assured to buy bulk premium fasteners for sale here from our factory. Good service and quality products are available.
Address: 6C, No.201, Ningxia Road, Putuo District, Shanghai, China.
E-mail: sales@welfast.com
WebSite: https://www.welfast.com/