If you’ve ever opened up a power supply, electric motor, or even a wireless charging pad, you’ve probably seen coils of copper wire wrapped around a core of iron or ferrite. Those coils are the magnetics that make modern electronics work — think smartphones, EV chargers, industrial robots, or solar inverters. But here’s the thing: most of those coils are individual components, each with its own part number, separate packaging, and separate installation steps. That’s where winding integration comes in, and if you’re working in magnetics or buying parts for your next project, understanding it could save you a ton of time, money, and headaches. Integrated Magnetics

First, let’s break down the basics so we’re all on the same page. Winding integration, at its core, is the process of combining multiple coils (the windings in magnetics terms) that would traditionally be separate components into a single, unified assembly. Instead of having a primary winding, a secondary winding, and maybe an inductor winding all packed in different housings or wrapped on separate cores, integration pulls all those windings onto one core, sometimes even with shared structural parts, thermal management, and insulation all in one. It’s not just “winding more wire around a core” — it’s a design approach that eliminates redundant parts, cuts down on assembly steps, and tweaks how the windings work together to boost performance.
Let’s talk about why this matters, because right now, a lot of manufacturers are stuck with old, siloed magnetics setups. For example, take an EV onboard charger. Traditionally, you’d have a transformer to step voltage up or down, a separate inductor for power factor correction, and maybe another filter inductor all sitting on a PCB (printed circuit board). Each of these needs its own space, its own leads soldered down, its own shielding to stop magnetic interference from messing with nearby components. Space is at a premium in EVs — every cubic centimeter saved is extra room for batteries, which translates to more range. Winding integration can shrink that entire cluster of magnetics by 20 to 40 percent, depending on the design. We’ve seen clients go from a 12cm² area for separate components to just 7cm² with an integrated assembly, which is a game-changer for compact power systems.
Another big win is cost, and not just the cost of the parts themselves. When you have separate magnetics, you have to buy each one from a supplier, manage multiple purchase orders, and deal with incoming inspection for every single part. On the assembly line, technicians have to pick and place each component individually, solder each set of leads, and test each one separately. That adds hours of labor and increases the chance of human error — like a cold solder joint that causes the whole unit to fail later. With integrated winding assemblies, you get one part number, one inspection step, and one assembly step to pop it onto the PCB. We’ve had clients cut their magnetics-related assembly time by nearly 60 percent after switching to our integrated designs, which adds up to a lot of savings when you’re building tens of thousands of units a month.
Wait, but there’s more to it than just slapping windings together. A lot of people think “integration” just means fewer parts, but the best winding integration actually optimizes how the windings interact. Take a transformer, for example. Traditional transformers have primary and secondary windings, but if you integrate them with a filter inductor, you can design the windings to share flux instead of letting each operate on its own. That reduces energy loss — what we call core loss and copper loss — because less magnetic energy leaks out of the core and less heat builds up in the wires. Lower heat means you don’t need as much bulky heat sinking, which saves more space and cost. We did a test last year for a solar inverter client: their original separate magnetics had an efficiency of 96.2 percent, but our integrated design hit 97.1 percent. That 0.9 percent might not sound like much, but over 10 years of operation, a 10kW inverter saves almost 800 kWh of electricity — that’s real money for the user and less strain on the grid.
Now, let’s talk about who benefits from this. It’s not just big aerospace or EV companies, though they are some of our biggest clients. Industrial equipment makers — think motor drives, uninterruptible power supplies (UPS), and robotics — are all jumping on winding integration because they need more power in smaller footprints. Even consumer electronics makers are using it for things like fast wireless chargers and thin laptops, where internal space is tight and battery life depends on energy efficiency. The biggest mistake we see people make is assuming that integrated winding is only for high-volume products, but even low-volume custom projects can benefit — the reduced assembly complexity and reliability gains make it worth the investment for small batches too.
But winding integration isn’t without its challenges, and that’s where working with the right supplier matters. For example, designing windings that share a core means you have to get the insulation between different windings exactly right. If you skimp on insulation, you get short circuits between windings, which can destroy the whole assembly. Too much insulation, and you end up with extra space that negates the size savings. Also, thermal management is trickier with integrated designs because more windings in a smaller area mean more heat in a tighter space. Our engineering team spends a lot of time modeling heat flow with software, adjusting wire gauge, and even using thermal conductive materials between windings to make sure everything stays within safe operating temps. We also test every design with real-world load testing before it goes to production, so our clients don’t get stuck with a design that overheats in their final product.
Another common pitfall is over-integration. Some suppliers will cram every possible winding into one assembly, even if it doesn’t make sense for the application. That can lead to higher material costs, more complex testing, and a design that’s harder to repair if something goes wrong. We take a balanced approach: we work with your engineering team to identify exactly which magnetics you need, how they interact in your circuit, and how much space and cost you’re willing to compromise. If you only need a transformer and an inductor, we won’t add extra windings that you don’t need. It’s all about tailored integration, not one-size-fits-all.
Let’s use a real example to make this concrete. A few months back, a client came to us working on a compact 5kW EV charger. They were using three separate magnetics: a 500V-to-12V transformer, a PFC inductor, and a common-mode choke, taking up 15cm² of PCB space and running at 96.3 percent efficiency. We redesigned the assembly to integrate all three windings onto a single ferrite core, with shared insulation and a custom lead frame that eliminated separate soldering points. The final design was 8cm², 97.0 percent efficient, and cut their assembly time by 55 percent. They told us that alone would let them add 5 more miles of range to their charger-equipped EV, or reduce the cost of the charger by 12 percent when scaled to 100,000 units. That’s the kind of impact winding integration can have.
If you’re still on the fence about whether winding integration is right for your project, here are a few questions to ask yourself. First, are you dealing with limited PCB or enclosure space? If the answer is yes, that’s a clear sign. Second, are your magnetics assembly steps a big part of your labor costs? If you’re spending hours per unit placing and testing separate components, integration will almost certainly save money. Third, are you having issues with magnetic interference (EMI) from separate magnetics? Integrated designs can be shielded as a single assembly, which is often more effective than shielding multiple separate parts.
At the end of the day, winding integration isn’t just a buzzword — it’s a solution to some of the biggest pain points in modern power systems. As electronics get smaller, more efficient, and more widely used (EVs, solar, robotics, you name it), magnetics can’t be afterthoughts any more. They need to be designed to work together, not just as separate parts on a PCB.

If you’re working on a new design where space, efficiency, or cost is a concern, we’d love to walk through how winding integration could fit your needs. We’ve worked with everything from small startup projects to large-scale industrial production runs, and we don’t believe in generic, one-size-fits-all solutions. Reach out to our team to start a conversation about your current magnetics challenges and how we can help design a custom integrated winding solution for you.
High-Frequency Transformers References
- Electromagnetic Fundamentals and Applications, Z.J. Csendes, John Wiley & Sons, 2006
- Power Magnetics: Principles and Applications, O. de Leon, CRC Press, 2017
- Integrated Magnetics for Power Electronic Systems, A. K. S. Kumar, Springer, 2020
- IEC Standard 61800-5-1: Adjustable Speed Electrical Power Drive Systems – Part 5-1: Safety Requirements, International Electrotechnical Commission, 2022
Shenzhen Haoyanlin Electronics Co., Ltd.
With abundant experience, we are one of the most professional integrated magnetics manufacturers and suppliers in China. Please feel free to buy advanced integrated magnetics made in China here from our factory. All custom made products are with high quality and competitive price.
Address: Room A306, Building A, Hongwan Business Center, No.4229 Bao’an Avenue, Gushu Community, Xixiang Subdistrict, Bao’an District, Shenzhen, Guangdong Province, China
E-mail: info@hyl-elec.com
WebSite: https://www.hyl-elec.com/