Posted in

What size coax cable is suitable for SMA connectors?

If you’ve ever worked with RF (radio frequency) gear—think Wi-Fi routers, GPS devices, SDRs, or even car radio systems—you’ve probably dealt with SMA connectors. These little threaded connectors are workhorses for high-frequency signals, right? But here’s the thing: even the most reliable SMA connector will fall flat if you pair it with the wrong coax cable. As someone who’s been supplying SMA connectors for years, I’ve lost count of how many times I’ve gotten messages from customers (hobbyists, startup engineers, even big-name tech teams) asking, “Wait, which coax size do I actually need for SMA?” SMA Type Connector

It’s not a one-size-fits-all question, but it’s way simpler than you might think. Let’s break this down like we’re chatting over a coffee (no stuffy engineering jargon, promise—just what actually works out in the field).

First, let’s get one basic rule straight: SMA connectors are designed to fit specific coax cable outer diameters (OD) and inner conductor sizes. If the cable’s diameter doesn’t match, you can’t screw the connector on properly—no amount of force will fix that, and forcing it will damage both the connector and the cable. That’s the number one mistake I see. A lot of folks grab any coax they have lying around, jam an SMA connector on, and wonder why their signal is dropping like a rock or reflecting back garbage.

Now, what are the common coax sizes used with SMA? Let’s list the ones that show up 9 times out of 10:

  • RG-174: This is the tiny, flexible one—OD is roughly 0.11 inches (about 2.8mm). It’s super thin, easy to route around tight spaces, and perfect for low-power, short-distance runs (like inside a router or a small SDR setup).
  • RG-58: The workhorse for many hobby projects—OD is 0.195 inches (around 5mm). It’s sturdier than RG-174, handles a bit more power, and works great for distances up to 50 feet or so.
  • RG-213: Thicker, more heavy-duty—OD is 0.405 inches (10.3mm). This one’s for long runs or higher-power setups, like connecting an antenna to a base station, where signal loss is a big concern.

Wait, but hold on—there are others, like RG-316 (a tiny semi-rigid, OD ~0.086 inches) and even some low-loss alternatives like LMR-100 or LMR-200, which are basically upgraded versions of RG-174 and RG-58 with less signal loss. But let’s stick to the basics first because that’s where most people get tripped up.

Let’s get to the actual pairing: what SMA connector fits which coax?

Straight SMA connectors (the most common type) come in two main types for standard coax: male and female, but the critical part here is the back end—the part that crimps to the coax. For example, an SMA male crimp connector is made to fit either RG-174, RG-58, or RG-213, depending on the model. I can’t stress this enough: don’t just buy an SMA connector and assume it works with your existing cable. If you’re using RG-174, you need an SMA connector labeled for RG-174; if it’s RG-58, get one for RG-58. Mixing them up will result in a loose connection, poor signal, or a connector that won’t seat right.

But why does this matter beyond just fitting? Let’s talk about signal, because that’s the whole point of using coax in the first place. Coax has something called “characteristic impedance”—almost always 50 ohms for SMA setups (you’ll rarely see 75 ohms here, that’s more for TV cables). If your connector and cable don’t both have 50 ohms, you get signal reflection. That means part of your RF signal bounces back instead of going to the antenna, which can kill your range, make your Wi-Fi slow, or even damage your transmitter if the reflection is too strong.

So the coax size affects two key things: loss (how much signal disappears as it travels) and power handling (how much signal the cable can carry without overheating or breaking). The thicker the cable, the less signal loss it has. For example, RG-174 might lose 4dB of signal over 10 feet at 2.4GHz (that’s the Wi-Fi band)—not terrible for a short run, but over 50 feet, that’s 20dB lost, which is half your signal. RG-58 would be around 7dB over 10 feet, way better, and RG-213 is even lower. For long runs (like an antenna on your roof to a router inside the house), you definitely don’t want to skimp on cable thickness—RG-58 is a minimum here, and RG-213 or LMR-400 if you’re going 100+ feet.

Wait, but what if you’re working with high frequencies? SMA connectors are rated up to 18GHz, right? The cable size matters here too. Thicker coax like RG-213 works better at higher frequencies because the signal doesn’t wander as much from the center conductor (the inner wire that carries the signal). If you’re doing something like a 5GHz Wi-Fi setup or a 12GHz SDR, don’t use RG-174—that tiny cable will have way too much loss at those frequencies, and your SMA connector won’t perform as well as it should.

Let’s talk about common use cases, because that’s when it all clicks. I’ll list some of the most frequent setups our customers ask about, and exactly which coax size pairs with the SMA connectors we supply:

  1. Hobbyist SDR (Software Defined Radio) setup: Most folks use tiny SMA connectors paired with RG-174 or RG-316. These are easy to solder or crimp, flexible enough to tuck into small cases, and work great for short runs (a few feet) on frequencies up to 6GHz. We sell a ton of SMA male crimp connectors for RG-174 here—they’re cheap, reliable, and fit perfectly.
  2. Home Wi-Fi antenna upgrade: If you’re adding an external antenna to your router, you’ll probably use an SMA male to SMA male pigtail. The coax here is almost always RG-58— it’s sturdy enough to handle being routed along walls, has low enough loss for 10-20 feet, and fits standard SMA connectors. A lot of people make the mistake of using thin RG-174 here, and wonder why their signal doesn’t get any stronger—go RG-58, you’ll notice a big difference.
  3. Car radio or marine RF setup: These often use longer coax runs (15-50 feet) and higher power. RG-58 or LMR-200 is a safe bet here, paired with SMA connectors that are rated for higher power (our SMA connectors have a power handling up to 500W for RG-58, which is more than enough for most car radios).
  4. High-frequency test gear: If you’re working with lab equipment that runs 10GHz or higher, you’ll need semi-rigid coax (like RG-402, OD ~0.086 inches) paired with SMA connectors that are designed for high frequency. These aren’t for bending, but they have super low loss and hold their impedance perfectly—great for testing signals without interference.

Now, what about mistakes to avoid? Let’s list the ones I’ve seen so many times:

  • Forcing a connector onto the wrong cable: If the coax won’t slide onto the SMA connector easily, stop. You’re either using the wrong connector for your cable, or you’re misaligning the center conductor. Forcing it will break the center pin, bend the connector threads, or create a bad connection.
  • Mixing male and female connectors incorrectly: It’s not just size—make sure your SMA connector’s center pin matches your cable’s inner conductor. A male SMA connector has a protruding center pin, so it needs to fit into the cable’s inner conductor. A female SMA has a socket, so it fits over the cable’s inner conductor. Again, if this doesn’t line up, your signal will be terrible.
  • Skipping low-loss coax for high frequencies: We had a customer last year who was building a 10GHz radio, used RG-174, and couldn’t figure out why his range was only 10 feet. Switched to LMR-100 (the low-loss RG-174 alternative) and got 50 feet—huge difference.
  • Buying cheap, off-brand connectors: A lot of people will grab a random SMA connector from a hardware store for $1, but those often have bad impedance control or loose crimps. Our SMA connectors are tested for 50 ohms at up to 18GHz, so you don’t have to worry about that.

Wait, but what if you’re still not sure? How do you pick between, say, RG-174 and RG-58? It comes down to three questions: how long is your run, what frequency are you using, and how much signal do you need? If the run is under 10 feet and frequency is under 2.4GHz, RG-174 is fine. Over 10 feet or higher frequency, go RG-58. If you’re over 50 feet, step up to RG-213 or LMR-400.

And one last tip: when you’re crimping or soldering the SMA connector to your coax, don’t skimp on that step. A bad crimp is just as bad as the wrong size. If you’re not comfortable soldering, get pre-made pigtails—we sell pre-crimped SMA pigtails for all common coax sizes, so you don’t have to mess with it.

At the end of the day, the right coax size for your SMA connector is all about matching the three Fs: Fit (the connector has to slide on easily), Frequency (higher frequencies need thicker coax), and Function (longer runs or higher power need thicker coax too). It’s not rocket science, but it’s the difference between a project that works perfectly and one that drives you crazy with bad signal.

If you’re still unsure about which size is right for your setup—whether it’s a hobby project, a commercial device, or a test rig—we’re here to help. We supply a full range of SMA connectors paired with all standard coax sizes, and we can walk you through picking the right one for your needs. Just reach out to our team to discuss your requirements.

RF Connectors References:

  • RF Coaxial Cable: Characteristics and Applications, Microwave Journal, 2021
  • SMA Connector Performance for High-Frequency Systems, IEEE Transactions on Microwave Theory and Techniques, 2019
  • Coaxial Cable Loss Calculation Guidelines, Society of Broadcast Engineers, 2020

Zhenjiang Leiluo Electronic Co., Ltd.
Zhenjiang Leiluo Electronic Co., Ltd. is one of the most professional sma type connector manufacturers and suppliers in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy advanced sma type connector for sale here and get quotation from our factory. Customized orders are welcome.
Address: No.21 Houxiang Industrial Road, Danbei Town, Danyang City, Jiangsu Province
E-mail: wenvy@rfleiluo.com
WebSite: https://www.rfreyno.com/