Hey everyone, let’s cut to the chase: if you’re in the aquaculture game or just dipping your toes into making fish feed, you’ve probably wondered—can the same animal feed machines I use for livestock actually work for fish feed? As someone who’s been supplying animal feed machines for over 12 years, I get this question ALL the time. Last month alone, three fish farm owners hit me up asking if they could skip the expensive, custom-made fish feed line and just repurpose their existing gear. So let’s break this down straight—no jargon, no corporate fluff, just real talk from someone who’s seen both sides. Animal Feed Machine

First, let’s clear up the basics. Animal feed machines are designed to turn grains, soy, meal, and other livestock feed ingredients into uniform pellets for cows, chickens, pigs, and the like. Fish feed? It’s a whole different ball game because different fish species have specific needs. Like, tilapia and catfish need floating pellets that stay on top of water for hours, while salmon and trout need sinking pellets that sit at certain depths, and shrimp feed needs to slowly break down without polluting the water. That’s not just a “set it and forget it” difference—it’s about moisture, pressure, cooling, and even the pellet size.
Now, can you actually adapt an animal feed machine to make fish feed? The short answer is: yes, but only if you pick the right machine and make a few key tweaks. Let’s start with the most common type of animal feed machine people ask about—pellet mills. Most small-scale livestock farmers use flat die or ring die pellet mills, right? Flat die models are super popular because they’re affordable, compact, and easy to use. Here’s the thing: a basic flat die animal feed pellet mill can make fish feed pellets, but you can’t just run the same livestock feed mix through it. Livestock feed usually has more dry grain, while fish feed needs a mix with higher oil and protein content—those are the bits that help the pellets float or sink.
Wait, let’s test this with a real example. Last year, a guy from a 50-acre catfish farm in Georgia called me up. He had a 15 HP flat die pellet mill he used to make feed for his 1,200 chickens, and he wanted to use it to cut costs on catfish feed (which was running him $0.28 per pound at the time). We walked through the steps he needed to take: first, he swapped out his standard livestock die for a fish feed-specific die (we supply those as an add-on, by the way). Then, he adjusted his feed mix to 32% protein, 5% vegetable oil, and a binder like wheat flour or carboxymethyl cellulose—stuff that holds the pellet together in water. He cranked up the moisture in his mix to 14-16% (livestock feed is usually 10-12%), and upped the pellet mill’s pressure just a little to make the pellets denser. The result? His first test pellets floated for 45 minutes, which was perfect for his catfish fingerlings, and he cut his feed cost to $0.19 per pound. That’s a real win, no fancy custom line required.
But hold up—there are limits. If you have a large ring die animal feed machine for commercial livestock, can that work too? Sometimes, but again, it’s about the die and the downstream processing. Large ring die mills are built for high-volume livestock pellets, so they can handle bigger batches, but fish feed needs a cooling step that’s a bit different. Livestock pellets just need to cool down so they don’t mold, but fish feed pellets need to cool slower so the oil doesn’t separate—if oil seeps out, the pellets sink or fall apart in the water. So even if your ring die mill works, you might need to add a small rotary cooler, which is a pretty low-cost add-on, not a whole new machine.
Now, let’s talk about what doesn’t work. If you have a hammer mill (that’s the machine that grinds grain into feed powder)—no, that’s just for prepping ingredients, not making pellets. If you have a feed mixer with no pelletizing capability, you can mix your fish feed, but you can’t turn it into usable pellets. Those are non-starters. Also, if you’re trying to make feed for species that need very specific pellet texture, like shrimp feed that needs to be slow-sinking and not disintegrate for 24 hours, a basic animal feed machine might not cut it. The die holes would be too big or too small, or the pressure wouldn’t be enough to bind the ingredients properly.
Here’s another angle: why would someone even consider using an animal feed machine for fish feed? The main reason is cost. Custom fish feed lines—like the ones made just for aquaculture—can run $50,000 to $200,000, depending on capacity. If you’re a small to medium fish farm (less than 100 tons of feed per year), that’s a huge upfront cost. A used flat die pellet mill is $2,000 to $8,000, and the die and other tweaks are another $500 to $1,500. That’s a no-brainer for many operations. But you have to be honest about your volume: if you’re making more than 150 tons of feed a year, a dedicated aquaculture line is going to be more efficient in the long run, because animal feed machines aren’t designed for continuous fish feed production. They can overheat if you run them 24/7 for months, which wears out parts faster.
Let’s get into the science a little, because that’s where a lot of people get tripped up. Fish feed pellets rely on two key properties: durability (so they don’t break apart during handling or in the water) and buoyancy (or lack thereof, depending on the fish). When you run ingredients through a pellet mill, the friction from the die and rollers heats up the mix—about 160-180°F. That gelatinizes the starch in the ingredients, which acts as a natural binder. For floating pellets, you need a little extra oil mixed in before pelleting, and the cooling step after pelleting traps small air bubbles in the pellet, making it lighter than water. For sinking pellets, you cut the oil, maybe add a little more dense ingredient like fish meal, and the air bubbles escape during cooling. An animal feed mill’s heat output is usually just right for gelatinizing starch, but if you don’t adjust the mix, you’ll end up with pellets that either sink when they should float (or vice versa) or crumble in the water.
I’ve seen mistakes too. A guy in Texas tried to run 10% less oil in his catfish feed, and the pellets sank 10 minutes after hitting the water. His catfish wouldn’t eat from the bottom, so he wasted half the batch. Another one: he forgot to increase the moisture, so the pellets fell apart in the mixer before he even put them in the water. Those are avoidable with a small bit of tweaking, which is why a lot of people reach out to me for guidance—we’ve helped over 400 farmers adapt their machines for fish feed, so we know the common pitfalls.
Wait, what about tilapia vs. salmon? Tilapia are omnivores that eat near the surface, so floating pellets work. Salmon are carnivores that eat at depth, so sinking pellets. The same animal feed machine can handle both, as long as you change the die size and adjust the mix. For tilapia, you use a 2-3 mm die for fingerlings, 5-6 mm for adults. For salmon, a 4-5 mm die, less oil. That’s just a few settings changes, no need to buy a whole new machine.
Now, let’s talk about maintenance, because that’s a big one. Animal feed machines for livestock are usually maintained with lubricants that are fine for dry grain, but when you’re making fish feed, you’re dealing with higher protein and oil, which can attract more moisture and lead to mold if you don’t clean the machine after every use. I always tell customers using their animal feed machine for fish feed to clean the die, rollers, and mixing chamber with a dry brush after each batch, and run a small batch of dry grain through the machine once a week to prevent clogging. If you skip that, you’ll get cross-contamination—like chicken feed bits in your fish feed, which is not a big deal for some species, but it can throw off the nutrient balance for sensitive fish.
Is there any scenario where you should NOT use an animal feed machine for fish feed? Let’s list them clearly: 1) If you’re a large-scale commercial aquaculture operation (over 200 tons of feed annually) — dedicated aquaculture lines have better automation, consistent pellet quality, and lower long-term operating costs. 2) If you’re making feed for cold-water species like trout that need very high protein (45-50%) — while you can tweak an animal feed mill, the die and pressure might not be enough to hold that high-protein mix together in cold water. 3) If you’re just starting out and can afford a small dedicated fish feed pellet mill — those are designed specifically for aquaculture, so you don’t have to do as much tweaking, even if they’re a bit more expensive upfront.
Here’s a quick case study that sticks with me. A shrimp farmer in Louisiana, Maria, had a 10 HP flat die pellet mill she used for her family’s chicken operation. She wanted to make her own shrimp feed because the custom feed she was buying was $0.55 per pound, and her profit margins were getting squeezed. We advised her to get a shrimp-specific die (smaller holes, 1-2 mm), adjust her mix to 38% protein, 2% oil, and a binder of alginate (better for shrimp than wheat flour, since it dissolves slowly). She also added a small tumble dryer to the line (since shrimp feed needs to be drier, 8-10% moisture, than livestock feed). The first batch she made lasted 12 hours in the pond, didn’t disintegrate, and cut her feed cost to $0.38 per pound. She now supplies extra feed to three other small shrimp farms in her area, so it’s not just saving her money—it’s a side hustle.
So to circle back to the original question: Can animal feed machines make fish feed? The answer is, absolutely—if you choose the right machine, make targeted tweaks to the die, ingredients, and downstream processing, and match the machine to your operation’s size and target species. It’s not a one-size-fits-all, but for small to medium farms, it’s a cost-effective way to save thousands of dollars a year on feed costs.
Now, if you’re sitting there thinking, “This sounds like something I could use for my farm, but I’m not sure what adjustments I need,” or “I have an old animal feed machine I want to repurpose,” feel free to reach out to us for a chat. We don’t do pushy sales—we’ll walk you through what works for your specific setup, whether it’s a small flat die mill, a large ring die system, or even a mixer you’re thinking of using. No pressure, just real advice from someone who’s been in the game for decades.
Oh, and one last thing: if you do try this, start small. Make a test batch with a small amount of your existing machine, test the buoyancy and durability in a bucket of water, and adjust from there. Don’t dump a whole run of fish at the pond with untested pellets—we’ve seen that go wrong too many times.

Now, if you’re ready to talk through your options, just connect with our team for a no-obligation consultation. We’re here to help you make the best choice for your farm, whether that’s adapting your current animal feed machine or moving to a dedicated aquaculture line.
Fish Feed Production Line References:
- New, M. B., & Coche, A. G. (2005). Fish Feed Technology. FAO Fisheries and Aquaculture Department.
- Hertrampf, J. W., & Harald, G. (2018). Pelleting of Animal Feed and Fish Feed: A Review. Journal of Applied Animal Nutrition, Vol. 6, pp. 1-12.
- Webb, C. (2019). Small-Scale Aquaculture Feed Production: Adaptations of Livestock Feed Machinery. Aquaculture Economics and Management, Vol. 23, No. 2, pp. 189-205.
- Turchini, G. M., et al. (2020). Formulating Sustainable Fish Feeds: Nutritional and Environmental Considerations. Reviews in Aquaculture, Vol. 12, No. 4, pp. 2145-2168.
Jinan Bright Machinery Co., Ltd
As one of the most professional animal feed machine manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to buy advanced animal feed machine for sale here from our factory. Contact us for more details.
Address: South Zone, Wande Industrial Park, Changqing District, Jinan City, Shandong Province
E-mail: admin@dingrunmachine.com
WebSite: https://www.chinafeedmachine.com/