{"id":3692,"date":"2026-11-18T22:01:44","date_gmt":"2026-11-18T14:01:44","guid":{"rendered":"http:\/\/www.drinkingfountainacacia.com\/blog\/?p=3692"},"modified":"2026-11-18T22:01:44","modified_gmt":"2026-11-18T14:01:44","slug":"what-size-coax-cable-is-suitable-for-sma-connectors-4b17-89a53c","status":"publish","type":"post","link":"http:\/\/www.drinkingfountainacacia.com\/blog\/2026\/11\/18\/what-size-coax-cable-is-suitable-for-sma-connectors-4b17-89a53c\/","title":{"rendered":"What size coax cable is suitable for SMA connectors?"},"content":{"rendered":"<p>If you\u2019ve ever worked with RF (radio frequency) gear\u2014think Wi-Fi routers, GPS devices, SDRs, or even car radio systems\u2014you\u2019ve probably dealt with SMA connectors. These little threaded connectors are workhorses for high-frequency signals, right? But here\u2019s the thing: even the most reliable SMA connector will fall flat if you pair it with the wrong coax cable. As someone who\u2019s been supplying SMA connectors for years, I\u2019ve lost count of how many times I\u2019ve gotten messages from customers (hobbyists, startup engineers, even big-name tech teams) asking, \u201cWait, which coax size do I actually need for SMA?\u201d <a href=\"https:\/\/www.rfreyno.com\/rf-connectors\/sma-type-connector\/\">SMA Type Connector<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.rfreyno.com\/uploads\/48486\/small\/rf-coaxial-connector-n-male-crimp-for-lmr19553c0d.jpg\"><\/p>\n<p>It\u2019s not a one-size-fits-all question, but it\u2019s way simpler than you might think. Let\u2019s break this down like we\u2019re chatting over a coffee (no stuffy engineering jargon, promise\u2014just what actually works out in the field).<\/p>\n<p>First, let\u2019s get one basic rule straight: SMA connectors are designed to fit specific coax cable outer diameters (OD) and inner conductor sizes. If the cable\u2019s diameter doesn\u2019t match, you can\u2019t screw the connector on properly\u2014no amount of force will fix that, and forcing it will damage both the connector and the cable. That\u2019s the number one mistake I see. A lot of folks grab any coax they have lying around, jam an SMA connector on, and wonder why their signal is dropping like a rock or reflecting back garbage.<\/p>\n<p>Now, what are the common coax sizes used with SMA? Let\u2019s list the ones that show up 9 times out of 10:<\/p>\n<ul>\n<li><strong>RG-174<\/strong>: This is the tiny, flexible one\u2014OD is roughly 0.11 inches (about 2.8mm). It\u2019s super thin, easy to route around tight spaces, and perfect for low-power, short-distance runs (like inside a router or a small SDR setup).<\/li>\n<li><strong>RG-58<\/strong>: The workhorse for many hobby projects\u2014OD is 0.195 inches (around 5mm). It\u2019s sturdier than RG-174, handles a bit more power, and works great for distances up to 50 feet or so.<\/li>\n<li><strong>RG-213<\/strong>: Thicker, more heavy-duty\u2014OD is 0.405 inches (10.3mm). This one\u2019s for long runs or higher-power setups, like connecting an antenna to a base station, where signal loss is a big concern.<\/li>\n<\/ul>\n<p>Wait, but hold on\u2014there are others, like RG-316 (a tiny semi-rigid, OD ~0.086 inches) and even some low-loss alternatives like LMR-100 or LMR-200, which are basically upgraded versions of RG-174 and RG-58 with less signal loss. But let\u2019s stick to the basics first because that\u2019s where most people get tripped up.<\/p>\n<p>Let\u2019s get to the actual pairing: what SMA connector fits which coax?<\/p>\n<p>Straight SMA connectors (the most common type) come in two main types for standard coax: male and female, but the critical part here is the back end\u2014the part that crimps to the coax. For example, an SMA male crimp connector is made to fit either RG-174, RG-58, or RG-213, depending on the model. I can\u2019t stress this enough: don\u2019t just buy an SMA connector and assume it works with your existing cable. If you\u2019re using RG-174, you need an SMA connector labeled for RG-174; if it\u2019s RG-58, get one for RG-58. Mixing them up will result in a loose connection, poor signal, or a connector that won\u2019t seat right.<\/p>\n<p>But why does this matter beyond just fitting? Let\u2019s talk about signal, because that\u2019s the whole point of using coax in the first place. Coax has something called \u201ccharacteristic impedance\u201d\u2014almost always 50 ohms for SMA setups (you\u2019ll rarely see 75 ohms here, that\u2019s more for TV cables). If your connector and cable don\u2019t both have 50 ohms, you get signal reflection. That means part of your RF signal bounces back instead of going to the antenna, which can kill your range, make your Wi-Fi slow, or even damage your transmitter if the reflection is too strong.<\/p>\n<p>So the coax size affects two key things: loss (how much signal disappears as it travels) and power handling (how much signal the cable can carry without overheating or breaking). The thicker the cable, the less signal loss it has. For example, RG-174 might lose 4dB of signal over 10 feet at 2.4GHz (that\u2019s the Wi-Fi band)\u2014not terrible for a short run, but over 50 feet, that\u2019s 20dB lost, which is half your signal. RG-58 would be around 7dB over 10 feet, way better, and RG-213 is even lower. For long runs (like an antenna on your roof to a router inside the house), you definitely don\u2019t want to skimp on cable thickness\u2014RG-58 is a minimum here, and RG-213 or LMR-400 if you\u2019re going 100+ feet.<\/p>\n<p>Wait, but what if you\u2019re working with high frequencies? SMA connectors are rated up to 18GHz, right? The cable size matters here too. Thicker coax like RG-213 works better at higher frequencies because the signal doesn\u2019t wander as much from the center conductor (the inner wire that carries the signal). If you\u2019re doing something like a 5GHz Wi-Fi setup or a 12GHz SDR, don\u2019t use RG-174\u2014that tiny cable will have way too much loss at those frequencies, and your SMA connector won\u2019t perform as well as it should.<\/p>\n<p>Let\u2019s talk about common use cases, because that\u2019s when it all clicks. I\u2019ll list some of the most frequent setups our customers ask about, and exactly which coax size pairs with the SMA connectors we supply:<\/p>\n<ol>\n<li><strong>Hobbyist SDR (Software Defined Radio) setup<\/strong>: Most folks use tiny SMA connectors paired with RG-174 or RG-316. These are easy to solder or crimp, flexible enough to tuck into small cases, and work great for short runs (a few feet) on frequencies up to 6GHz. We sell a ton of SMA male crimp connectors for RG-174 here\u2014they\u2019re cheap, reliable, and fit perfectly.<\/li>\n<li><strong>Home Wi-Fi antenna upgrade<\/strong>: If you\u2019re adding an external antenna to your router, you\u2019ll probably use an SMA male to SMA male pigtail. The coax here is almost always RG-58\u2014 it\u2019s sturdy enough to handle being routed along walls, has low enough loss for 10-20 feet, and fits standard SMA connectors. A lot of people make the mistake of using thin RG-174 here, and wonder why their signal doesn\u2019t get any stronger\u2014go RG-58, you\u2019ll notice a big difference.<\/li>\n<li><strong>Car radio or marine RF setup<\/strong>: These often use longer coax runs (15-50 feet) and higher power. RG-58 or LMR-200 is a safe bet here, paired with SMA connectors that are rated for higher power (our SMA connectors have a power handling up to 500W for RG-58, which is more than enough for most car radios).<\/li>\n<li><strong>High-frequency test gear<\/strong>: If you\u2019re working with lab equipment that runs 10GHz or higher, you\u2019ll need semi-rigid coax (like RG-402, OD ~0.086 inches) paired with SMA connectors that are designed for high frequency. These aren\u2019t for bending, but they have super low loss and hold their impedance perfectly\u2014great for testing signals without interference.<\/li>\n<\/ol>\n<p>Now, what about mistakes to avoid? Let\u2019s list the ones I\u2019ve seen so many times:<\/p>\n<ul>\n<li><strong>Forcing a connector onto the wrong cable<\/strong>: If the coax won\u2019t slide onto the SMA connector easily, stop. You\u2019re either using the wrong connector for your cable, or you\u2019re misaligning the center conductor. Forcing it will break the center pin, bend the connector threads, or create a bad connection.<\/li>\n<li><strong>Mixing male and female connectors incorrectly<\/strong>: It\u2019s not just size\u2014make sure your SMA connector\u2019s center pin matches your cable\u2019s inner conductor. A male SMA connector has a protruding center pin, so it needs to fit into the cable\u2019s inner conductor. A female SMA has a socket, so it fits over the cable\u2019s inner conductor. Again, if this doesn\u2019t line up, your signal will be terrible.<\/li>\n<li><strong>Skipping low-loss coax for high frequencies<\/strong>: We had a customer last year who was building a 10GHz radio, used RG-174, and couldn\u2019t figure out why his range was only 10 feet. Switched to LMR-100 (the low-loss RG-174 alternative) and got 50 feet\u2014huge difference.<\/li>\n<li><strong>Buying cheap, off-brand connectors<\/strong>: A lot of people will grab a random SMA connector from a hardware store for $1, but those often have bad impedance control or loose crimps. Our SMA connectors are tested for 50 ohms at up to 18GHz, so you don\u2019t have to worry about that.<\/li>\n<\/ul>\n<p>Wait, but what if you\u2019re still not sure? How do you pick between, say, RG-174 and RG-58? It comes down to three questions: how long is your run, what frequency are you using, and how much signal do you need? If the run is under 10 feet and frequency is under 2.4GHz, RG-174 is fine. Over 10 feet or higher frequency, go RG-58. If you\u2019re over 50 feet, step up to RG-213 or LMR-400.<\/p>\n<p>And one last tip: when you\u2019re crimping or soldering the SMA connector to your coax, don\u2019t skimp on that step. A bad crimp is just as bad as the wrong size. If you\u2019re not comfortable soldering, get pre-made pigtails\u2014we sell pre-crimped SMA pigtails for all common coax sizes, so you don\u2019t have to mess with it.<\/p>\n<p>At the end of the day, the right coax size for your SMA connector is all about matching the three Fs: Fit (the connector has to slide on easily), Frequency (higher frequencies need thicker coax), and Function (longer runs or higher power need thicker coax too). It\u2019s not rocket science, but it\u2019s the difference between a project that works perfectly and one that drives you crazy with bad signal.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.rfreyno.com\/uploads\/48486\/small\/rf-coaxial-connector-bnc-male-crimp-for7e21d.jpg\"><\/p>\n<p>If you\u2019re still unsure about which size is right for your setup\u2014whether it\u2019s a hobby project, a commercial device, or a test rig\u2014we\u2019re here to help. We supply a full range of SMA connectors paired with all standard coax sizes, and we can walk you through picking the right one for your needs. Just reach out to our team to discuss your requirements.<\/p>\n<p><a href=\"https:\/\/www.rfreyno.com\/rf-connectors\/\">RF Connectors<\/a> References:<\/p>\n<ul>\n<li>RF Coaxial Cable: Characteristics and Applications, Microwave Journal, 2021<\/li>\n<li>SMA Connector Performance for High-Frequency Systems, IEEE Transactions on Microwave Theory and Techniques, 2019<\/li>\n<li>Coaxial Cable Loss Calculation Guidelines, Society of Broadcast Engineers, 2020<\/li>\n<\/ul>\n<hr>\n<p><a href=\"https:\/\/www.rfreyno.com\/\">Zhenjiang Leiluo Electronic Co., Ltd.<\/a><br \/>Zhenjiang Leiluo Electronic Co., Ltd. is one of the most professional sma type connector manufacturers and suppliers in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy advanced sma type connector for sale here and get quotation from our factory. Customized orders are welcome.<br \/>Address: No.21 Houxiang Industrial Road, Danbei Town, Danyang City, Jiangsu Province<br \/>E-mail: wenvy@rfleiluo.com<br \/>WebSite: <a href=\"https:\/\/www.rfreyno.com\/\">https:\/\/www.rfreyno.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever worked with RF (radio frequency) gear\u2014think Wi-Fi routers, GPS devices, SDRs, or even &hellip; <a title=\"What size coax cable is suitable for SMA connectors?\" class=\"hm-read-more\" href=\"http:\/\/www.drinkingfountainacacia.com\/blog\/2026\/11\/18\/what-size-coax-cable-is-suitable-for-sma-connectors-4b17-89a53c\/\"><span class=\"screen-reader-text\">What size coax cable is suitable for SMA connectors?<\/span>Read more<\/a><\/p>\n","protected":false},"author":79,"featured_media":3692,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3655],"class_list":["post-3692","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-sma-type-connector-447e-89d52f"],"_links":{"self":[{"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/posts\/3692","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/users\/79"}],"replies":[{"embeddable":true,"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/comments?post=3692"}],"version-history":[{"count":0,"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/posts\/3692\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/posts\/3692"}],"wp:attachment":[{"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/media?parent=3692"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/categories?post=3692"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.drinkingfountainacacia.com\/blog\/wp-json\/wp\/v2\/tags?post=3692"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}